3D · JP043
Inspect the lid, hinge or sliding drawer in normal use.
A lift-off lid and separate drawer around a fixed inner tray in a stepped outer case.

Nominal main case dimensions. The inside dimensions refer to the upper tray.
Complete closed assembly envelope: 202 × 152 × 121.9 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0435 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0585 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0647 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0832 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0600 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0765 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0895 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1170 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Eight blanks. Source core fold axes are 199.2 × 149.6 × 19.6 mm for the lid, 189.4 × 139.8 × 58 mm for the upper tray and 193 × 146.5 × 46.7 mm for the drawer at the reference size. The outer case has a half-height front wall with a drawer opening and an integral bottom. The lid lifts independently and the lower tray slides through the opening. Paper fold axes allow for full board caliper. The reference board dimensions are retained. Concealed attachment and drawer fit allowances are nominal.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.