3D · JP028
Inspect the lid, hinge or sliding drawer in normal use.
Two complementary triangular shells surrounding a full-depth inner box.

Lengths at the outer shell fold axes. The inside dimensions refer to the wrapped inner tray.
Complete closed assembly envelope: 104.6 × 102.6 × 102.8 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0298 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0417 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0285 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0298 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0417 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0212 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0463 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0632 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0446 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0020 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Ten blanks preserve the complementary triangular cheeks, deep inner box, cross linings and two additional facing or joining sheets. The 45° seam follows the square reference at 100 × 100 mm. It follows the edited width-to-height ratio. The visible closing line and the fixed inner box guide the modeled opening. Concealed paper bond locations are nominal.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.