3D · HC013
Inspect the lid, hinge or sliding drawer in normal use.
Mirrored pivoting doors surround two nested base elements and an optional stock-specific divider. Separate wrapping and inner mounting layers are included.

Inside dimensions describe the usable base cavity. Outside dimensions measure the closed assembly. Die-line dimensions use the main case reference axes.
Complete closed assembly envelope: 469.4 × 337.9 × 101.4 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2.5 mm | 1 | 100 | 0.1336 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1543 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1307 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.1336 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1543 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1307 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.2142 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.2161 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.2041 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.2938 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.3402 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1831 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1831 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.0388 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0631 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2.5 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Mirrored pivoting doors surround two nested base elements and an optional stock-specific divider. Separate wrapping and inner mounting layers are included. The divider is shown along the long dimension and the additional under-divider layers are reconstructed as nested liner sections. Their exact original placement and stock callouts require layer or assembly evidence. Materials are modeled at the selected calipers. Hinge relief, adhesive and hidden closure hardware require factory confirmation.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.