3D · JP033V
Inspect the lid, hinge or sliding drawer in normal use.
Continuous V-grooved case with a removable three-board hardcover.

Complete closed assembly envelope: 310.6 × 292.2 × 39 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2.5 mm | 1 | 100 | 0.1994 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.2312 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1071 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.1132 m² | |
| Outer wrapping paper | 2.5 mm | 1 | 100 | 0.1537 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.1187 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.0652 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.0038 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.0652 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1597 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2.5 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
The dieline shows the folding blanks after corner waste removal. Use Raw stock groove DXF for the rectangular board and extended groove axes.
The outer case is one continuous four-panel V-grooved board. The removable hardcover has three independent boards and its own paper spine hinges. The 0.5 mm sample double-wall card insert is a separate removable blank. The opening animation clears the case lid, raises the book above the tray, and then turns the book cover. The source shows a two-leaf page reference. Page stock, page count and binding allowance require a separate specification. Fold offsets and wrap returns are reconstructed to fit the modeled stock. Confirm magnetic hardware and tooling against a physical sample. The source gives m2 = 2.5 mm for the tray facing. Confirm the stock identity and caliper before manufacture.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.