3D · JP024
Inspect the lid, hinge or sliding drawer in normal use.
A full-width cover joins two shallow shells over a winged inner tray and four individual end papers.

Continuous case paper reference length, face width and closed height.
Complete closed assembly envelope: 106 × 35.7 × 20.5 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0138 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0018 m² | |
| Greyboard core | 1 mm | 1 | 100 | 0.0056 m² | |
| Greyboard core | 1 mm | 1 | 100 | 0.0056 m² | |
| Greyboard core | 1 mm | 1 | 100 | 0.0061 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0095 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0008 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0008 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0008 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0008 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 0.2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Ten outlines. The long rectangle forms the two exterior faces and shared rear web. The four short shaped wraps stay individual parts, with separate inner reinforcement and a winged tray wrap. The source exposes the front-to-rear cover span, three cross axes, dust wings and end-wall stock dimensions. Paper corner reliefs and registrations are independently reconstructed. Editable geometry was reconstructed from the archived drawing, dimension table and available reference views. Neutral-axis allowances, adhesive, paper joints and tooling require a prototype.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.