3D · JP005
Inspect the lid, hinge or sliding drawer in normal use.
Two lined rigid trays and a separately cut, four-leg insert with two editable rounded apertures.

Inside H is usable base depth; outside H is the complete closed assembly. Neutral H is the base core wall height.
Complete closed assembly envelope: 179.8 × 99.8 × 52.9 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0403 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0547 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0383 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0448 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0600 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0427 m² | |
| Folding-card insert | 3 mm | 1 | 100 | 0.0179 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Separate physical blanks use the selected actual calipers. All scores and motion are editable, independent geometry; vendor/factory exactness is not asserted. Board hinge/groove axes, paper corner reliefs, glue compression and hardware-free assembly are nominal. Confirm cutter profile, depth, residual skin and physical fit before production. Seven source blanks when internal linings and platform are selected. Both source selectors remove actual material blanks. The source platform is 3 mm stock of unspecified material. It is a separate insert stock in this model; its score-tool and load rating require confirmation.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.