JP001X · Open rigid tray with optional cross lining

One wrapped open tray with a removable lining blank and a selectable V-groove recipe.

JP001X original construction illustration
Your rigid box

Inside H is the usable base depth; neutral H is the base core wall height.

Usable inside 167.2 × 87.2 × 46.8 mmOutside 172.4 × 92.4 × 49.4 mm3 physical blanks · 27 linked panels

Complete closed assembly envelope: 172.4 × 92.4 × 49.4 mm

Assembled form · no separate closure

3D · JP001X

Drag to rotate · pinch or use + / − to zoom

Inspect the lid, hinge or sliding drawer in normal use.

Cutting plans · JP001X

Open tray core · floorOpen tray core · north wallOpen tray core · east wallOpen tray core · south wallOpen tray core · west wallOpen tray outer paper · floorOpen tray outer paper · north wallOpen tray outer paper · east wallOpen tray outer paper · south wallOpen tray outer paper · west wallOpen tray outer paper · tapered corner tabOpen tray outer paper · tapered corner tabOpen tray outer paper · tapered corner tabOpen tray outer paper · tapered corner tabOpen tray outer paper · north board-width capOpen tray outer paper · north inner returnOpen tray outer paper · east board-width capOpen tray outer paper · east inner returnOpen tray outer paper · south board-width capOpen tray outer paper · south inner returnOpen tray outer paper · west board-width capOpen tray outer paper · west inner returnOpen tray cross lining · floorOpen tray cross lining · north wallOpen tray cross lining · east wallOpen tray cross lining · south wallOpen tray cross lining · west wall170L · mm90W · mm172.2L · mm92.2W · mm167.4L · mm87.4W · mm905.2layout · mm229layout · mm
100%
Drag to pan · use + / − to zoom
Choose a panel in either view to inspect the same part.

Construction & material thickness

Three blanks with the source lining selected; two without. The reference has no lid, so none is synthesized. Live source V-slot No retains board score axes and adds two core calipers across the wrap floor and one to depth, at unchanged source reference L/W/D. This adaptation applies that allowance to the whole core/wrap build; actual core fold axes are reported separately from the source reference. The operation remains a nominal board-hinge recipe; the source does not disclose cutter profile, depth or residual skin.

Artwork on paper

Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.

Placement

Paper appearance

Preview colours are separate from material caliper and print-ready colour specifications.

Printing & finishing

Spot UV, foil and embossing require separate production masks. Their precise relief and spot positions are not simulated.

Quotation details

Components & cutting list

BlankMaterialCaliperPer setOrder blanksNet area / set
Greyboard core2 mm11000.0403 m²
Outer wrapping paper0.2 mm11000.0547 m²
Lining paper0.2 mm11000.0383 m²

Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.

Separate sheet plans & machine settings

Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.

Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.

Cutting machine limits

CAD & proof files

All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.

JP001X · Open rigid tray with optional cross lining100 sets · Rigid box · To be quoted
Construction checks & source references

Separate physical blanks use the selected actual calipers. All scores and motion are editable, independent geometry; vendor/factory exactness is not asserted. Board hinge/groove axes, paper corner reliefs, glue compression and hardware-free assembly are nominal. Confirm cutter profile, depth, residual skin and physical fit before production. Three blanks with the source lining selected; two without. The reference has no lid, so none is synthesized. Live source V-slot No retains board score axes and adds two core calipers across the wrap floor and one to depth, at unchanged source reference L/W/D. This adaptation applies that allowance to the whole core/wrap build; actual core fold axes are reported separately from the source reference. The operation remains a nominal board-hinge recipe; the source does not disclose cutter profile, depth or residual skin.

Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.

Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.

Review your quotation brief

JP001X · Rigid box · Price to be quoted

DesignJP001X · Open rigid tray with optional cross lining
CategoryRigid boxes
Reference—
Dimension subjectInside H is the usable base depth; neutral H is the base core wall height.
Dimensions entered170 × 90 × 48 mm · Neutral fold lines
Usable inside167.20 × 87.20 × 46.80 mm
Outer dimensions of selected subject172.40 × 92.40 × 49.40 mm
Physical blanks per set3
Fit clearance1.1 mm per side
PrintingNo printing
Film laminationNo film lamination
UV coatingNo UV coating
Foil stampingNone
Emboss / debossNone
ArtworkNone
Quantity100 sets
Overrun0%
DeliveryCollection
Notes—
Open tray coreGreyboard core · 2 mm · 100 blanks · 4.026 m² net
Open tray outer paperOuter wrapping paper · 0.2 mm · 100 blanks · 5.474 m² net
Open tray cross liningLining paper · 0.2 mm · 100 blanks · 3.828 m² net

Revisions stay on this device. No order or payment has been submitted.