3D · JP001
Inspect the lid, hinge or sliding drawer in normal use.
Separate lid and base crosses retain different return depths on long and end walls.

Inside H is usable base depth; outside H is the complete closed assembly. Neutral H is the base core wall height.
Complete closed assembly envelope: 209.4 × 109.4 × 54.7 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0500 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0631 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0548 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0688 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Separate physical blanks use the selected actual calipers. All scores and motion are editable, independent geometry; vendor/factory exactness is not asserted. Board hinge/groove axes, paper corner reliefs, glue compression and hardware-free assembly are nominal. Confirm cutter profile, depth, residual skin and physical fit before production. Four physical blanks. Lid N/S returns are 9 mm and E/W returns 18 mm; base N/S returns 9 mm and E/W returns 17 mm at the captured default. Half-cut versus groove tooling is not identified by the source. Board-hinge scores remain nominal and require a tool specification.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.