3D · DM001
Inspect the lid, hinge or sliding drawer in normal use.
Two cut-cross rigid trays with independent wraps and tapered corner tabs.

Inside H is usable base depth; outside H is the complete closed assembly. Neutral H is the base core wall height.
Complete closed assembly envelope: 258.8 × 158.8 × 74.4 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0935 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1179 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0855 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1095 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Separate physical blanks use the selected actual calipers. All scores and motion are editable, independent geometry; vendor/factory exactness is not asserted. Board hinge/groove axes, paper corner reliefs, glue compression and hardware-free assembly are nominal. Confirm cutter profile, depth, residual skin and physical fit before production. Four source blanks; no invented lining. The larger shallow source tray is the lid, although it is drawn below the smaller deep base. Live source Tips explicitly says this design has no source 3D and refers to related JP001V. Our editable 3D is an independent reconstruction from DM001 drawings and dimensions. Its unannotated paper cut extents remain nominal. The source exposed core sizes are preserved at the default. The source explicitly provides no DM001 3D; our geometry is independently generated.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.