3D · HC101D
Inspect the lid, hinge or sliding drawer in normal use.
The 50 mm lid has rectangular groove stock, while the inner base is a cut-cross with unequal wall heights and an independent lining.

Neutral L and W are cover board axes. Neutral H is the lower core sidewall height. Inside dimensions describe the base.
Complete closed assembly envelope: 152.4 × 152.4 × 54.15 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0463 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0632 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0424 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0525 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0704 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0494 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
The dieline shows the folding blanks after corner waste removal. Use Raw stock groove DXF for the rectangular board and extended groove axes.
The lid starts as 250 × 250 mm rectangular stock at default axes. The base is 46 mm on its short sides and 50 mm on the long sides. Both source cross linings remain separate materials. Neutral hinge planes are rebuilt from the selected material gauges. Captured source cut and wrap extents are retained separately where the source groove and paper allowances differ. Machining profile, residual board skin, paper compression and adhesive buildup remain supplier settings. Check a physical sample before tooling.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.