3D · HC003
Inspect the lid, hinge or sliding drawer in normal use.
Three nested cores with separate papers and a rear paper hinge.

Complete closed assembly envelope: 301.6 × 252.4 × 82.4 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.1181 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1478 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.1181 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1533 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1146 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.1465 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1775 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1427 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0133 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Nine source blanks with both linings. The upper wrap extends across the full closed back and a separate paper reinforcement bridges the rear joint. The wrapped tray is fixed to the lower shell. The upper shell and upper reinforcement leaf pivot about the paper joint. The model uses the observed construction and individually editable material gauges. Tooling, adhesive and concealed attachment details are nominal.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.