3D · HC101BV
Inspect the lid, hinge or sliding drawer in normal use.
The keyed cover and wrapped plinth surround a tray made from one rectangular board, with corner waste removed at preparation.

Neutral dimensions refer to the tall cover wall core. Inside dimensions describe the usable tray opening and closed height.
Complete closed assembly envelope: 102.4 × 102.4 × 153.15 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0098 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0597 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0933 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0203 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0313 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0100 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0174 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
The dieline shows the folding blanks after corner waste removal. Use Raw stock groove DXF for the rectangular board and extended groove axes.
The four-slot roof edge and two-key seam follow the retained drawing. The base starts as rectangular V-groove stock. The attached plinth and top-wing layer order are nominal from the available views. Neutral hinge planes are rebuilt from the selected material gauges. Captured source cut and wrap extents are retained separately where the source groove and paper allowances differ. Machining profile, residual board skin, paper compression and adhesive buildup remain supplier settings. Check a physical sample before tooling.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.