3D · JP006VD
Inspect the lid, hinge or sliding drawer in normal use.
An open middle tube locates a long closed cover and a separate shallow end cap.

Complete closed assembly envelope: 148.1 × 72 × 30.8 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 1.2 mm | 1 | 100 | 0.0233 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0273 m² | |
| Greyboard core | 1.2 mm | 1 | 100 | 0.0158 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0182 m² | |
| Greyboard core | 1.2 mm | 1 | 100 | 0.0077 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0118 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 1.2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Three assembled members remain separate: an open middle ring, a long five-sided cover with a real circular finger opening, and a shallow cross-shaped end cover. No cross-tray floor or separate liners are added. Normal opening moves both end-cover blanks together; the middle ring remains fixed to the long member. The exposed ring band remains visible between covers. The middle-ring paper has its observed second circle and long side overlap; its core remains unperforated. The registered paper opening exposes the inner core as a grip surface. Paper mouth returns receive an aligned relief wherever they cover the circular opening. This through-ply relief and ring insertion alignment are independently derived manufacturing adaptations. This is an independently reconstructed editable material model. V-groove width/depth, half-cut residual skin, adhesive film, ribbon retention and sliding friction are nominal; source or factory equivalence is not asserted.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.