3D · HC005B
Inspect the lid, hinge or sliding drawer in normal use.
A short end cover travels with the wrapped tray inside a longer five-sided sleeve.

Complete closed assembly envelope: 207.4 × 128.2 × 62.2 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0669 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0788 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0647 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0592 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0787 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0570 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0242 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0362 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Three assembled members are retained: long five-sided sleeve, wrapped rigid drawer and separate short end cover. The two covers are not replaced by a single rectangular sleeve. The source closed end is at the sleeve rear. Product opening moves the drawer and its attached end cover toward the open mouth. Paper cap reliefs, locking insertion, glue film and sliding friction are independently nominal.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.