3D · HC005A
Inspect the lid, hinge or sliding drawer in normal use.
A five-sided greyboard sleeve contains an integral double-wall folding-card tray.

Complete closed assembly envelope: 203.5 × 186.3 × 46.55 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.1002 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1116 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0975 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0982 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
A rigid five-sided sleeve holds one integral double-wall folding-card tray. Core board and card stock are different materials and have separate cutting plans. The source closed end is at the sleeve rear. Product opening moves the drawer and its attached end cover toward the open mouth. The ribbon option cuts four sleeve-core slots, four matching outer-wrap slots and two matching front drawer-wall slots. Sleeve lining covers the ribbon attachment; its paper is not cut. Slot centres are independently dimensioned from the visible source feature, not extracted vendor geometry. Paper cap reliefs, locking insertion, glue film and sliding friction are independently nominal.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.