3D · HC002A
Inspect the lid, hinge or sliding drawer in normal use.
A double-wall folding-card collar fits inside wrapped greyboard lid and base trays.

Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.1619 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1967 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1072 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.1619 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1967 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1577 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.1949 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Separate core, wrap and liner blanks use their actual selected calipers. Paired-score paper rims place inner returns on the inside of the core. Greyboard V-groove axes, paper turn-in reliefs and glue allowances are independent nominal engineering; tooling depth, board crushing, adhesives and production fit need supplier confirmation. Seven blanks with both linings enabled. The collar is folding card, not another greyboard tray or a fabricated neck wrap. Inside L/W describe the aperture through the doubled card walls. Inside H is floor-to-lid enclosed height. The base lining is one rectangle; the lid lining has separate walls.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.