3D · JP036
Inspect the lid, hinge or sliding drawer in normal use.
Wrapped book case with a separate raised floor, upright divider and apertured platform.

Main tray core fold axes; usable cavity measured above the raised floor before the divider and insert.
Complete closed assembly envelope: 188.4 × 141 × 50.2 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 3 mm | 1 | 100 | 0.0681 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0866 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0428 m² | |
| Greyboard core | 3 mm | 1 | 100 | 0.0479 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0586 m² | |
| Greyboard core | 3 mm | 1 | 100 | 0.0209 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0316 m² | |
| Greyboard core | 3 mm | 1 | 100 | 0.0043 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0101 m² | |
| Folding-card insert | 0.2 mm | 1 | 100 | 0.0161 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 3 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Ten source blanks. Greyboard case, tray, floor plate and divider gauges are independent. The thin platform is separate folding stock. The source flat shows two matched cavity pairs, a small tray slot and a rectangular aperture in the four-legged insert. The divider bonding face and insert position are nominal. The model uses the observed construction and individually editable material gauges. Tooling, adhesive and concealed attachment details are nominal.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.