3D · JP025VA
Inspect the lid, hinge or sliding drawer in normal use.
The nominal 10 mm shoulder reveal and unequal shell heights are preserved. There is one four-wall core band, one double-wall wrapping band and a pair of rectangular floor papers.

L/W are the main shell datum. H spans the shell floor/roof fold planes. Inside H measures the usable distance between material faces.
Complete closed assembly envelope: 251.1 × 251.5 × 81.5 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 1.5 mm | 1 | 100 | 0.1017 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1227 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0612 m² | |
| Greyboard core | 1.5 mm | 1 | 100 | 0.0917 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1256 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0612 m² | |
| Greyboard core | 1.5 mm | 1 | 100 | 0.0741 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1515 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 1.5 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
The nominal 10 mm shoulder reveal and unequal shell heights are preserved. There is one four-wall core band, one double-wall wrapping band and a pair of rectangular floor papers. The drawing shows two floor papers. The source groups its inner mounting paper into one selector, modeled here as a switch for the pair. Source dimensions refer to the recorded studio plans. Fold-line width and assembled dimensions are related through the selected physical calipers and independent shell clearances. Cutter profiles, groove skin, adhesive build and final physical fit need confirmation on a production sample.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.