3D · HC107
Inspect the lid, hinge or sliding drawer in normal use.
Two independently sized U-cores with four separate wrapped end boards and diagonal folding inserts.

Inside is the usable base cavity, outside is the complete closed assembly including material, and neutral dimensions are the source reference size inputs.
Complete closed assembly envelope: 307.4 × 206.9 × 81.8 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 3 mm | 1 | 100 | 0.1040 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1266 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0988 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0136 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0039 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0039 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0512 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0136 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0039 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0039 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0512 m² | |
| Greyboard core | 3 mm | 1 | 100 | 0.1116 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1349 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1052 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0154 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0045 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0045 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0577 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0154 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0045 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0045 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0577 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 3 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Lid and base use separate 3 mm U-cores and 2 mm end greyboards. Lid and base retain their distinct main bands and end-wall dimensions. The side-wrapper corner folds and folding card use the drawn split diagonal construction. Reliefs and bonding tolerances are nominal.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.