3D · HC020X
Inspect the lid, hinge or sliding drawer in normal use.
Three-board outer case, paired long-and-short wall strips, and a diagonal X floor with wall flanges.

Complete closed assembly envelope: 417.4 × 317.03 × 125.86 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.1309 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0500 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.1309 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.3549 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.3060 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0479 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0361 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1079 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0475 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0356 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1067 m² | |
| Folding-card insert | 0.4 mm | 1 | 100 | 0.1414 m² | |
| Folding-card insert | 0.4 mm | 1 | 100 | 0.0275 m² | |
| Folding-card insert | 0.4 mm | 1 | 100 | 0.1414 m² | |
| Folding-card insert | 0.4 mm | 1 | 100 | 0.0275 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
The diagonal cut, two reinforcing card profiles and adhesive faces of the X floor are reconstructed from the visible drawing. The dieline re-creates the separately drawn board, paper, liner and card blanks in millimetres. Assembled and Flattened are reversible construction views. The folding control follows the physical scores from flat blanks. The assembled case has a separate lid opening. Test the nominal hidden joints and tape allowances with a physical sample before production.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.