3D · HC104BD
Inspect the lid, hinge or sliding drawer in normal use.
The cut-cross tray receives a four-wall paper band and edge laps; its central floor has no outer wrapping sheet.

Complete closed assembly envelope: 300.4 × 201.4 × 82.4 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.1440 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1720 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0634 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.1251 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1084 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Independently reconstructed from the saved technical plan and published source parameters. These are editable design dimensions, not native vendor CAD or a factory-validated cutting recipe. Case core, case wrap, partial lining and a separately wrapped cut-cross tray remain separate physical blanks. Manufacturing fold and normal 180° cover opening are separate. Core, covering paper and inner lining use a common assembled opening axis; flexible paper behaviour immediately around the hinge is nominal. Paper flat neutral dimensions are solved from the full-caliper assembly; listed source paper dimensions are retained separately as reference anchors because the vendor bend / groove convention is not established. V-groove width, depth, residual board skin, half-cut tooling, adhesive compression, magnets and strength require a production specification. The tray uses a wall band with top returns, underfloor edge laps and a side seam. It has no continuous wrapping sheet beneath the central floor. The inner cut-cross core keeps its source half-cut hinge classification; it is not substituted with a rectangular V-corner stock blank.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.