3D · HC104AB
Inspect the lid, hinge or sliding drawer in normal use.
The recessed-base case holds a separate cut-cross tray and uses a partial lid / flap lining.

Complete closed assembly envelope: 300.4 × 202.4 × 82.4 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.1668 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1984 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0862 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.1246 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1794 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Independently reconstructed from the saved technical plan and published source parameters. These are editable design dimensions, not native vendor CAD or a factory-validated cutting recipe. Case core, case wrap, partial lining and a separately wrapped cut-cross tray remain separate physical blanks. Manufacturing fold and normal 180° cover opening are separate. Core, covering paper and inner lining use a common assembled opening axis; flexible paper behaviour immediately around the hinge is nominal. Paper flat neutral dimensions are solved from the full-caliper assembly; listed source paper dimensions are retained separately as reference anchors because the vendor bend / groove convention is not established. V-groove width, depth, residual board skin, half-cut tooling, adhesive compression, magnets and strength require a production specification. Closure circles are core cut-outs / nominal recesses. Outer paper and lining cover them; no unprovided magnet or ribbon hardware is asserted.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.