3D · HC104BC
Inspect the lid, hinge or sliding drawer in normal use.
A rectangular grooved inner board with a separate four-wall paper band and no wrap across the floor.

Complete closed assembly envelope: 300.4 × 201.4 × 82.4 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.1440 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1718 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0634 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.1301 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1121 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
The dieline shows the folding blanks after corner waste removal. Use Raw stock groove DXF for the rectangular board and extended groove axes.
Five pieces. The BC tray retains the rectangular corner-groove board, but the outer tray paper is a four-wall strip with underfloor laps and no central floor sheet. Positions are derived from the source drawings and displayed dimensions. Nominal full-caliper fit allowances are recorded separately from the captured vendor sizes. The editable core pockets represent covered closure cavities. Hidden hardware, groove tooling and paper hinge flex require physical validation.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.