3D · HC004C
Inspect the lid, hinge or sliding drawer in normal use.
Five separate case boards, two bow-tie inner papers, diagonal corner folds and a dust-wing carrier.

Inside is the usable base cavity, outside is the complete closed assembly including material, and neutral dimensions are the source reference size inputs.
Complete closed assembly envelope: 200.6 × 160.45 × 78.65 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 3 mm | 1 | 100 | 0.0130 m² | |
| Greyboard core | 3 mm | 1 | 100 | 0.0300 m² | |
| Greyboard core | 3 mm | 1 | 100 | 0.0144 m² | |
| Greyboard core | 3 mm | 1 | 100 | 0.0306 m² | |
| Greyboard core | 3 mm | 1 | 100 | 0.0104 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1275 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0950 m² | |
| Folding-card insert | 0.2 mm | 1 | 100 | 0.0276 m² | |
| Folding-card insert | 0.2 mm | 1 | 100 | 0.0275 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0557 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0483 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0096 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0096 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 3 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
The drawing shows four round locations across the two closure bands. The editable circles represent aligned magnet seat locations at the captured 7.5 mm radius. Seat machining depth and magnet hardware require a separate specification. The drawing shows two 184 × 150 mm auxiliary layouts and matching bow-tie papers. The mounting order and diagonal flap articulation are nominal where the attachment is hidden.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.